Professional CCTV Tester with Power Over Ethernet (PoE) and IP Testing
Display and configure video; control PTZ; test cables, audio, IP network connections, PoE voltage; and power 12VDC cameras.
The TESTER-CCTVPOE-P Professional CCTV Tester with Power Over Ethernet (PoE) and IP Testing is a portable, multifunction tester for CCTV installations and maintenance. Power cameras and review the display without the hassle of running between the camera and a DVR located in a separate area. Test options include: audio, video, ping, TDR, PoE, IP network connections, and LAN (local area network) cable connections.
- 3.5" TFT-LCD with 480x320 resolution and up to 10x zoom.
- Automatically adapts and displays NTSC or PAL video – generates the PAL/NTSC multi-system color bar for video testing and calibration.
- Compact, hand-held size for easy operation.
- Video level testing: video signals measured in IRE or mV.
- 12V DC, 1A power output for cameras.
- Audio input testing.
- Check IP address and Ethernet connection of the connected device.
- Record and store images and video files.
- PTZ (Pan-Tilt-Zoom) control:
- Pan, tilt and zoom
- Adjust focus and aperture
- Configure and activate preset position
- Supports more than twenty PTZ protocols.
- Scans PTZ camera ID.
- Generates eight forms of PAL/NTSC color bar patterns.
- Test LAN or telephone cables for connection status.
- Displays wire sequence and serial number of cable tester.
- Supports RS232, RS485 and RS422.
- Captures and displays RS485 data for troubleshooting.
- Baud rate: 600 to 115200 bps.
- Tests the PoE voltage when a POE switch is supplying power to the IP camera.
- Displays the power+ and power- on the ethernet cable pins, each cable pin’s voltage and the failure connection of cable pin series numbers.
- Easily locate the connected port on the PoE switch by activating device port flicker.
- TDR cable testing accurately measures BNC, Ethernet, and serial cable break-point and short-circuit locations.
- USB-rechargeable Lithium-ion polymer battery.
- Connectors
- Three female BNC connectors for video input and output, and TDR cable break point and short circuit testing.
- Three female RJ45 ports for cable and PoE testing.
- One female 3.5mm stereo audio jack to test audio pickup.
- One 4-pin terminal block for RS232 interface.
- One 2-pin terminal block for RS485/RS422 interface.
- One female Mini USB Type A port for data transfer and battery charging.
- One micro SD slot for additional storage space.
- Includes 4GB micro SD card.
- Video
- Signal mode: NTSC/PAL (auto adapts).
- Display: 3.5" TFT-LCD, 480x320 resolution
- 10x image zoom available.
- LCD adjustments: brightness, contrast, and saturation.
- Video output mode: 1.0 Vp-p.
- Video level test: measured in IRE or mV.
- PTZ Controller
- Communication: RS232, RS422 simplex and RS485.
- PTZ protocol: compatible with more than 30 protocols.
- PELCO-D/P, Samsung, etc.
- 600, 1200, 2400, 4800, 9600, 19200, 57600, 115200 bps.
- Video Signal Generation
- Eight different PAL/NTSC color bar video signals.
- UTP Cable Test
- Test RJ45 or RJ11 cables for connection status.
- Power over Ethernet (PoE) Test
- Displays power+ and power- on each Ethernet cable pin.
- Port flicker feature sends signals to the connected PoE port, enabling quick identification.
- IP connection
- Use IP address scan to discover the connected camera's IP address.
- Use Link monitor to check if the assigned IP address is occupied.
- Use Ping test to ensure the assigned IP address is correct and properly connected.
- IP camera video cannot be displayed on tester’s LCD.
- TDR Test
- Accurately measures BNC, Ethernet, and serial cable break-point and short circuit locations.
- PTZ Data Capture
- Reads and displays RS485 commands sent from controllers.
- Power
- Powered by a 3.7V Lithium-ion polymer battery, 3000 mAh.
- Runtime: up to 11 hours
- Recharge using included USB Type A male to Mini USB Type B male cable.
- Connect the USB cable to the included 5V, 1.5A power adapter or a PC.
- Power output for camera: 12VDC, 1A.
- Powered by a 3.7V Lithium-ion polymer battery, 3000 mAh.
- Dimensions
- WxDxH (in): 4.41x1.89x7.56 (112x48x192 mm).
- Weight
- 1.19 lb (540 g).
- Environmental
- Operating temperature: 14 to 122°F (-10 to 50°C).
- Operating humidity: 30 to 90% non-condensing RH.
- Regulatory Approvals
- CE, FCC.
- Package Contents
- CCTV tester
- Power supply (5V, 1.5A)
- CAT5 cable tester
- Lithium-ion polymer battery
- BNC male to male cable
- RS485 cable with alligator clips
- Power cable for camera
- 3.5mm audio cable with alligator clips
- Carrying case
- Neck strap for carrying case
- Neck strap for CCTV tester
- Instruction manual
- Warranty
- Two Years
Follow us